Case Study: Generator Set
By applying Dex DP1 10W40, the oil no longer requires changing, and a daily refill of 1 litre has proved sufficient.

Case Study: Reverse Gear
By applying Dex DP2 ISO VG100, the hammering sound has dis-appeared. The gearbox no longer leaks and the operating tem-perature has dropped by 9 degrees.

Case Study: Riva Prosecco
Very strong noise reduction, less heat development, less resistance, no soot from the exhaust, longer service time and lower fuel consumption.

Case Study: RCT - Spiegelgracht
Significant reduction in noise (up to minus 3.4 dB) directly above the gearbox at all speeds measured when using DEX QM GEAR 100 oil.

Case Study: Adriana
The temperature of the gearbox is significantly lower, and shifting is slower and therefore quieter. Furthermore, the tooth hammering is hardly audible anymore.

Interview: Water Board HHNK
Dex oil is cleaner and better filterable than other oils. We assume that this leads to lower energy consumption.

Test report HD4
Fuel savings of 7% lead annually to 260 tons CO2 savings and a reduction in NOx emissions of at least 15%.

Tests and oil analysis Rederij Bais Beheer BV
Lower resistance between moving parts with Dex oil, with exceptional results in engines and gearboxes.

Test report Ovet B.V. - Crane 8
Reduced operating costs, extended gearbox lifetime, substantial fuel and energy savings and increased reliability.

RDA Shiptech - RVI Inspection Report
The engine shows a cleaner picture under the valve covers; the overall picture is unchanged from the previous inspection.

Premium Heavy Industry Lubricants
Less downtime, lower fuel consumption, lower lubricant consumption, temperature reduction, noise reduction & NOx reduction with Dex 10W-40

DEX HYDRAULIC 32T
Safety Data Sheet

DEX DP2 ISO VG100
Safety Data Sheet

DEX OIL DP1 10W-40
Safety Data Sheet

DEX TPEO SAE 40
Safety Data Sheet